Grades
INCONEL_690
Inconel Fasteners Manufacturer, Supplier of Inconel 690 Bolts, Exporter of Inconel 690 Nuts and Bolts, Leading Inconel 690 Fasteners Manufacturers in India
Inconel Alloy 690 fasteners represent a nickel-based superalloy, comprising approximately 70% nickel, 17% chromium, and varying proportions of iron, aluminum, titanium, molybdenum, cobalt, copper, and manganese. Engineered to exhibit exceptional resistance to corrosion and oxidation, these fasteners are tailored for deployment in the most demanding environments. Notably, Inconel Alloy 690 fasteners boast a remarkable tensile strength exceeding 200 ksi (1400 MPa), enabling them to withstand the rigors of high-temperature stress without succumbing to deformation or structural failure. Furthermore, their non-magnetic properties render them well-suited for applications where magnetic interference could pose operational challenges, further underscoring their versatility and reliability across diverse industrial settings.
WNR 2.4669 Fasteners present numerous distinct advantages over alternative fastener types. Firstly, their exceptional strength-to-weight ratio ensures robust performance under heavy loads while maintaining a lightweight profile, avoiding bulkiness and unwieldiness. Moreover, their inherent resistance to corrosion, even in extreme conditions, distinguishes them from metals prone to rust, like stainless steel, thereby reducing the need for frequent maintenance to uphold their operational integrity over time. Additionally, their non-magnetic nature eliminates the risk of magnetic interference with nearby electrical equipment or devices, provided they are installed correctly. In addition to fasteners, our product line encompasses an array of offerings such as Copper Bolts, Copper Washers, and more, catering to diverse industrial needs.
Specifications of INCONEL 690
Standard INCONEL 690 Fasteners specifications as per Fasteners manufacturers.
Material | Inconel Alloy 690 |
Specification | IS/BS/ASTM |
Standards | ASTM B166 |
Size | 3 mm to 200 mm |
Length | M02 to M33 |
Types of INCONEL 690 Fasteners
Each INCONEL 690 Fasteners have unique design each of them are used in specific applications. Some of them are mentioned below.
Nut
- Hex Nuts
- Square Nut
- Nylock Nut
- Lock Nut
- Coupling Nut
- Heavy Hex Nut
- Dome Nut
- Wing Nut
- Cage Nut
- Cap Nut
- Castle Nut
Bolt
- Hex Bolt
- Allen Bolt
- Anchor Bolt
- Hex Flange Bolt
- Coil Bolt
- L Bolt
- U Bolt
- Stud Bolt
- Eye Bolt
- Square Head Bolt
- Carriage Bolt
- J Bolt
- T Bolt
- Elevator Bucket Bolt
Washer
- Belleville Washers
- Flat Washers
- Spring Washers
- Square Washer
- Countersunk Washer
- Bonded Sealing Washers
- Lock Washers
- Star Washers
- Plain Washers
Types of INCONEL 690 Fasteners
Note that this chart includes only some of the most common sizes of INCONEL 690 Bolt. There are many other sizes available as well, and some applications may require custom sizes or special configurations.
INCONEL 690 Fasteners | Element (% By Mass) |
Nickel, Ni | 72.0 min |
Silicon, Si | .50 max |
Carbon, C | .15 max |
Sulphur, S | .015 max |
INCONEL 690 Mechanical Properties
Density | 8.1 g/cm3 |
Melting Point | 1350 °C (2460 °F) |
Tensile Strength | Psi – 1,35,000 , MPa – 930 |
Yield Strength (0.2%Offset) | Psi – 75,000 , MPa – 517 |
Elongation | 42.5 % |
Applications Of INCONEL 690
- Oil & Gas Industry
- Power Plant
- Marine & Ship Building Industry
- Refining Industry
- Oil & Automotive Industry
- Pharmacutical Industry
- Engineering Sector
- Engine & Turbines
- Aerospace Industry
- Construction Industry